Vertex

Application
The Vertex is positioned as an optimum solution for office and general lighting with high efficacy, exceptional lifetime and low glare values. CRI90+ as standard. Also suitable for locations where COI compliance is required.

Design
The electronic driver is mounted to the rear of the luminaire in an isolated thermal chamber. By separating the driver, the LEDs within the luminaire as well as the driver itself are kept at their lowest possible operating temperature. This ensures that the Vertex can offer the longest possible lifetime.

Optics
The combination of a Delta (CDP) diffuser and a V-shaped internal reflector is used for optimal beam shaping.

Control
DALI and non-dimming versions as standard. Organic Response, Tunable White (DALI Type 8) are available as options. Other options may be available through customisation.

Installation
Exposed T-bar as standard. Plaster recessed and Surface mount kits are available. Seismic restraint kit available.

Emergency
Maintained non-monitored and Maintained DALI-monitored options available as standard. Other options may be available through customisation.

Note
- Narrower variants (100mm, 150mm, 200mm) available via customisation.
- Wipedown version available via customisation.

N.B. All photometric, spectrometric and electrical data have a tolerance of ±10%.

Design Parameters: LLF=0.80 (Nominal), Room Reflectances (C/W/F): 0.70/0.50/0.20, Ceiling height=2.7m, Eh @0.72m AFFL.